Amazon affiliate links - we earn a commission.Affiliate disclosure

Buying guide · 12 min read · Updated 2026-11-21

Best Pruning Shears (2026)

Six bypass pruning shears compared on blade steel, cut capacity, spring design, grip fit and upkeep, with honest picks for roses, shrubs and fruit trees.

Brianna Cole, Lead Product EditorBy Brianna ColeLead Product Editor6 picks comparedSpec-sheet verified
Best Pruning Shears

At a glance

Our top picks

Side by side

Spec comparison

PieceTypeHandlesCut capacityBladeLength
ARS HP-VS8Z Signature Heavy Duty Bypass PrunerBest OverallARS HP-VS8Z Signature Heavy Duty Bypass PrunerBypass prunerNon-slip coated, ergonomicn/an/an/a
Fiskars Bypass Pruning Shears, 5/8 in Cut CapacityBest ValueFiskars Bypass Pruning Shears, 5/8 in Cut CapacityBypass prunern/a5/8 inchPrecision-ground steel, coatedn/a
Fiskars SoftGrip Bypass Pruning Shears, 5/8 in CapacityBest AmbidextrousFiskars SoftGrip Bypass Pruning Shears, 5/8 in CapacityBypass prunern/a5/8 inchHardened, precision groundn/a
Kimura 8 in Pro Bypass Shears, SK5 Steel, 1 in CapacityBest Japanese Steel ValueKimura 8 in Pro Bypass Shears, SK5 Steel, 1 in CapacityBypass prunerAluminium with non-slip PVC1 inchSK5 steel, listed 60 HRC8 inches
gonicc 8 in Professional Bypass Pruner, Titanium SK5 BladeBest Drop-Forged Budgetgonicc 8 in Professional Bypass Pruner, Titanium SK5 BladeBypass prunerAluminium with PVC wrapn/aSK5 steel, titanium coated8 inches
VOTREK 8.5 in Bypass Pruners, Sealed Spring, SK5 BladeBest Sealed SpringVOTREK 8.5 in Bypass Pruners, Sealed Spring, SK5 BladeBypass prunern/an/aSK5, Teflon-coated8.5 inches

Pruning shears look simple, but the difference between a clean cut and a crushed stem comes down to blade design, steel and fit. A good pair makes pruning quick and protects the plant, while a poor pair tears bark and tires the hand.

Most gardeners should buy a bypass pair, which cuts like scissors, and pay attention to capacity and spring quality. The sections below explain where cheaper clones cut corners and how to match a pair to the plants and hands that will use it.

Before you buy

6 Criteria to Look For Before Buying a Pruning Shear

  1. 01

    Bypass versus anvil

    A bypass pruner has two curved blades that pass like scissors and make clean cuts on live wood, while an anvil pruner presses a blade onto a flat surface and crushes the stem. All the models here are bypass designs, including the ARS HP-VS8Z and the Fiskars pair. Anvil tools suit dead, dry wood, so buying one for roses or fruit trees damages the plant.

  2. 02

    Cut capacity and honesty

    Cut capacity is the thickest stem the blade can cut without strain. The Fiskars models list 5/8 inch and the Kimura lists 1 inch, while the ARS and gonicc give no figure. Forcing a pruner past its capacity bends blades and loosens the pivot. Loppers handle 1 to 1.5 inches, such as the Fiskars 28 inch model, and a saw takes anything bigger.

  3. 03

    Blade steel and coating

    SK5 is a Japanese high-carbon steel that takes a sharp edge but can rust if left damp, as on the Kimura and gonicc. Coatings such as titanium, Teflon or hard chrome reduce friction and sap sticking, but they wear at the edge. Stainless steel resists rust and is softer. Buyers who ignore steel type end up with either rust or a dull edge.

  4. 04

    Spring and lock design

    The spring opens the blades after each cut, and it is where cheap clones fail first. The ARS uses a durable spring, while the VOTREK seals one inside the handle to keep debris out. A good lock keeps the blade closed in a pocket but must be easy to operate with gloves. A weak spring turns pruning into hand fatigue.

  5. 05

    Grip size and hand fit

    Hand fit decides comfort more than any specification. Small hands do better with slim handles and a narrow opening, while large hands need room to avoid cramping. The Fiskars SoftGrip suits left-handed users with its ambidextrous shape, and the Kimura and gonicc use light aluminium handles. Try to handle a pair, since discomfort ends up shortening sessions.

  6. 06

    Serviceability and parts

    A good pair can be sharpened, oiled and repaired for years. Professional tools such as the ARS HP-VS8Z are designed with replaceable parts in mind, while sealed or inexpensive models are often thrown away when the spring fails. Ask whether blades, springs and bolts can be bought separately. This matters most if you prune weekly.

Detailed reviews

The 6 best pruning shears, explained

01
ARS HP-VS8Z Signature Heavy Duty Bypass Pruner
Hard chrome bladeDurable springNon-slip handlesHeavy duty
Check price on Amazon
Best for: Frequent pruners who want a serviceable, long-lived professional tool.

The ARS HP-VS8Z is a heavy duty bypass pruner with hard chrome plated blades meant to resist rust and sap, and a spring the maker describes as high quality for increased durability. Those are the two parts that fail first on cheap shears, so a design that targets them directly is what earns it the top spot.

The tradeoff is cost and weight. It sits near the top of the price range, and the heavier build is tiring on a long session for smaller hands. Against the Fiskars Bypass Pruning Shears at 5/8 inch capacity, the ARS is aimed at professionals who prune daily and expect to service the tool, while the Fiskars targets the casual gardener.

The non-slip coated handles stay secure with damp gloves. In ownership, wipe the blades after each session, oil the pivot and keep the edge honed, since a tool of this class repays care more than any other here.

What works

  • Hard chrome plated blades resist rust and sticky sap through heavy use
  • Spring is built for durability, addressing the usual failure on cheaper shears
  • Non-slip coated handles keep a secure grip with gloves or damp hands
  • Professional heavy duty build suits daily work in orchards and beds

Watch out for

  • Highest cost tier in this lineup and heavier than the aluminium-handled models
  • Listing gives no cut capacity figure, so check before tackling thick stems

Specs

Type
Bypass pruner
Blade finish
Hard chrome plated
Spring
High quality, for durability
Handles
Non-slip coated, ergonomic
Class
Heavy duty, professional style
02
Fiskars Bypass Pruning Shears, 5/8 in Cut Capacity
Bypass5/8 in capacitySap grooveCoated blade
Check price on Amazon
Best for: Casual gardeners pruning flowers, herbs and small shrubs.

The Fiskars Bypass Pruning Shears are a straightforward bypass design with a 5/8 inch cut capacity, precision-ground steel blades and a coating meant to cut friction and sap build-up. A self-cleaning sap groove keeps the blades from sticking when you cut green growth.

The capacity figure is the honest part of the listing. At 5/8 inch it suits roses, perennials, herbs and small shrubs, and it tells you not to force it past that. Compared with the ARS HP-VS8Z, it is lighter and costs less, but you give up the replaceable-grade feel and the hard chrome finish, so expect to replace it sooner under heavy use.

In ownership, wipe off sap after use and keep the pivot lightly oiled. Sharpen the outer bevel of the bypass blade when it dulls, and do not use these on dead or woody stems that need an anvil tool or a saw.

What works

  • Clear 5/8 inch capacity tells you exactly what the tool will cut
  • Self-cleaning sap groove stops the blades sticking on green stems
  • Blade coating reduces friction and keeps cuts smooth
  • Lower cost and light enough for long sessions with small hands

Watch out for

  • Not built for heavy, daily professional use or for thick branches
  • Less serviceable than the heavy duty professional models

Specs

Type
Bypass pruner
Cut capacity
5/8 inch
Blade
Precision-ground steel, coated
Feature
Self-cleaning sap groove
Best for
Flowers and live stems
03
Fiskars SoftGrip Bypass Pruning Shears, 5/8 in Capacity
Bypass5/8 in capacityAmbidextrousSoftGrip
Check price on Amazon
Best for: Left-handed gardeners and anyone who values a softer grip.

The Fiskars SoftGrip uses the same 5/8 inch bypass blade concept as its sibling but adds a pruner shape that works in either hand and softer handle surfaces. Left-handed gardeners rarely get a proper tool, so an ambidextrous profile is a real selling point.

The tradeoff is that the SoftGrip handles are bulkier than the slim ones on the standard Fiskars and may feel large for very small hands. Against the Fiskars Bypass at the same capacity, you pay slightly more for comfort and handedness, but the blade performance is the same. It is not a heavy duty tool.

Care is the same as for any bypass pruner: wipe off sap, oil the pivot and sharpen the bevel when the cut starts to tear. The soft grip surfaces can wear with heavy use, so store the tool dry and out of strong sun.

What works

  • Shape works for both right and left hands, which is rare among pruners
  • Fully hardened precision ground steel blade stays sharp through normal use
  • Soft grip surfaces ease pressure during long sessions
  • Same clear 5/8 inch capacity as the standard Fiskars

Watch out for

  • Bulkier handles can feel large for very small hands
  • Soft grip surfaces will wear faster than hard coated handles

Specs

Type
Bypass pruner
Cut capacity
5/8 inch
Handedness
Right and left
Blade
Hardened, precision ground
Grip
SoftGrip handles
04
Kimura 8 in Pro Bypass Shears, SK5 Steel, 1 in Capacity
SK5 steel60 HRC1 in capacityAluminium handles
Check price on Amazon
Best for: Gardeners who want a sharp Japanese-steel pruner for shrubs and fruit trees.

The Kimura is an 8 inch bypass pruner with SK5 steel blades listed as heat treated to 60 HRC and a stated 1 inch capacity. SK5 is a high-carbon steel that takes a keen edge, and a hardness of 60 HRC suggests good edge retention, though harder steel can also chip if abused.

The tradeoff is that the 1 inch capacity is generous for a hand pruner, so it invites forcing branches that belong with a lopper. Compared with the Fiskars Bypass at 5/8 inch, it handles thicker stems on paper but lacks the sap groove and is less forgiving of misuse. Lightweight aluminium handles with PVC help with fatigue.

As a carbon-steel blade it needs more care to avoid rust. Wipe it dry after use, oil the blade and pivot, and keep it out of damp sheds. Do not twist the blade in a cut, because hard steel can nick.

What works

  • SK5 steel blades listed at 60 HRC hold a sharp edge well
  • Stated 1 inch capacity covers thicker shrub and fruit tree stems
  • Lightweight aluminium handles with PVC keep the tool comfortable
  • Eight inch length gives good leverage for the money

Watch out for

  • Carbon steel needs drying and oiling to avoid rust
  • Generous capacity tempts you to force cuts the tool should not make

Specs

Type
Bypass pruner
Blade
SK5 steel, listed 60 HRC
Cut capacity
1 inch
Handles
Aluminium with non-slip PVC
Length
8 inches
05
gonicc 8 in Professional Bypass Pruner, Titanium SK5 Blade
SK5 steelTitanium coatingDrop-forged8 in length
Check price on Amazon
Best for: Budget buyers who want forged construction and a coated blade.

The gonicc is an 8 inch bypass pruner with a titanium-coated SK5 blade, ultra-fine polishing and drop-forged construction. Forging gives the metal a denser structure than stamping, which helps the frame resist flexing under load.

The tradeoff is that coating does not change the steel underneath, and a titanium coating will wear with use and sharpening. Against the Kimura, which uses a similar SK5 blade, the gonicc offers a coated blade at a lower tier, but the listing states no cut capacity, so keep to stems of about 5/8 inch. Handles are aluminium wrapped in PVC.

For ownership, wipe the blade after each use and keep the pivot lubricated. When the coating wears at the edge, sharpening will expose bare steel, so dry the blade after sharpening to prevent rust.

What works

  • Drop-forged construction gives a rigid frame that resists flexing
  • Titanium-coated SK5 blade is polished for smooth cutting
  • Lightweight aluminium handles with PVC wrap are comfortable
  • Sits in the lower-mid tier among the models here

Watch out for

  • Listing gives no cut capacity, so stay with stems under about 5/8 inch
  • Coating will wear at the edge and does not replace regular upkeep

Specs

Type
Bypass pruner
Blade
SK5 steel, titanium coated
Construction
Drop-forged
Handles
Aluminium with PVC wrap
Length
8 inches
06
VOTREK 8.5 in Bypass Pruners, Sealed Spring, SK5 Blade
SK5 bladeSealed springTeflon coatingThumb lock
Check price on Amazon
Best for: Gardeners who fight clogged springs and want a thumb lock either hand can use.

The VOTREK VT-C800 is an 8.5 inch bypass pruner with a Teflon-coated SK5 blade, a sealed spring that keeps leaves and dirt out and an ambidextrous thumb lock. The sealed spring is the distinctive idea, since an exposed spring is where debris collects and where cheaper pruners start to stick.

The tradeoff is that sealing the spring makes it harder to inspect and replace, and coating can wear with sharpening. Compared with the ARS HP-VS8Z, which targets spring durability with a quality part, the VOTREK tries to protect a simpler one from debris. The listing does not give a clear cut capacity, so keep to small stems.

Care means wiping the blade, oiling the pivot and checking that the lock engages cleanly. Keep the sealed area free of sap, and if the spring ever fails, confirm whether a replacement is available.

What works

  • Sealed spring keeps leaves and debris out of the mechanism
  • Teflon-coated SK5 blade helps cuts stay smooth on sticky stems
  • Ambidextrous thumb lock suits left and right hands
  • Longer 8.5 inch body gives extra leverage over compact models

Watch out for

  • Sealed design may make spring replacement difficult
  • No clear cut capacity is stated, so forcing thick stems risks damage

Specs

Type
Bypass pruner
Blade
SK5, Teflon-coated
Spring
Sealed, jam-proof design
Lock
Ambidextrous thumb lock
Length
8.5 inches

Spec decoder

What the listing measurements really mean

The numbers brands lead with, translated into what they tell you about fit, comfort and wear at home.

Cut capacity

This is the thickest stem the pruner is designed to cut cleanly. Going beyond it strains the blade and pivot.

Watch forThe Fiskars models state 5/8 inch and the Kimura 1 inch, while the ARS and VOTREK give no figure.

SK5 steel

SK5 is a Japanese high-carbon steel with good edge retention. It resists wear well but needs drying to avoid rust.

Watch forThe Kimura, gonicc and VOTREK all use SK5, so compare coating, build and spring instead.

HRC hardness

HRC measures how hard the steel is on the Rockwell scale. Harder steel keeps its edge longer but can chip if twisted or hit.

Watch forThe Kimura lists 60 HRC, which is a claim, and few other listings publish hardness at all.

Blade coating

Coatings such as titanium, Teflon and hard chrome reduce friction and sap build-up. They protect the blade surface but wear at the cutting edge.

Watch forThe ARS uses hard chrome, the gonicc titanium and the VOTREK Teflon, so each wears differently.

Sap groove

A groove in the blade lets sap run away from the cutting surface instead of gumming the blades together. It keeps green-stem cuts smooth.

Watch forThe standard Fiskars lists a self-cleaning sap groove, but most clones do not mention one.

Methodology

How We Evaluated These Pruning Shears

Cut type and capacity

We confirmed every pair is a bypass design and compared stated capacities, such as 5/8 inch on the Fiskars and 1 inch on the Kimura. Where a listing gave no figure, we noted it. We did not cut test any pair ourselves.

Blade steel and finish

We compared steel and coatings from published specifications, including SK5 on the Kimura, gonicc and VOTREK and hard chrome on the ARS. Hardness claims such as 60 HRC were treated as claims. Rust risk was assessed from steel type.

Spring and lock quality

We looked at spring design, such as the durable ARS spring and the sealed VOTREK spring, and at lock style. Failure of the spring is the usual end of a cheap pruner. This is judged from design and owner feedback patterns.

Grip and hand fit

We compared handle materials, handedness and size using listing details, including the ambidextrous Fiskars SoftGrip and the aluminium handles on the Kimura. Comfort is an editorial judgement. Hand sizes vary widely.

Serviceability and long-term care

We asked how easily each pair can be sharpened, oiled and repaired, giving the ARS credit for its professional class. Sealed designs scored lower for serviceability. Longevity is based on design and not on our own use.

Decision guide

How to Choose the Right Pruning Shears

By Plant Type

SituationPickWhy
Roses, flowers, herbsFiskars Bypass Pruning Shears5/8 inch capacity and a sap groove
Shrubs and hedgesKimura 8 in Pro1 inch listed capacity with SK5 steel
Fruit trees and orchard workARS HP-VS8ZHeavy duty build and a durable spring
Sticky or resinous plantsVOTREK 8.5 inTeflon coating and a sealed spring

By Budget

SituationPickWhy
Low tier, reliableFiskars Bypass Pruning ShearsClear capacity and a coated blade
Low tier, forgedgonicc 8 inDrop-forged frame with a coated blade
Mid tier, Japanese steelKimura 8 in ProSK5 listed at 60 HRC
Top tier, long lifeARS HP-VS8ZHard chrome blades and a durable spring

Carbon Steel vs Coated Blades

Carbon steel

The Kimura and gonicc use SK5, which holds an edge well but rusts if left damp, so it suits gardeners who oil and dry tools.

Hard chrome and coatings

The ARS with hard chrome and the VOTREK with Teflon resist sap and rust longer, but the coating wears at the edge over time.

Choose carbon steel for edge quality and discipline, coated blades for easy upkeep.

By Hand Size and Handedness

SituationPickWhy
Left-handed gardenersFiskars SoftGripAmbidextrous shape
Small handsFiskars Bypass Pruning ShearsLight and slim handles
Large hands, long sessionsVOTREK 8.5 inLonger body for extra leverage
Gloved heavy workARS HP-VS8ZNon-slip coated handles

For Arthritic or Weak Hands Specifically

Look for

A light frame, a smooth spring that does not fight your grip, a comfortable handle shape and a sharp blade so you apply less force.

In this comparison

The Fiskars SoftGrip and the lightweight Kimura and gonicc are the easiest on the hand, and keeping any pair sharp helps more than any feature.

When to Spend More

Spend more if

You prune weekly, work with fruit trees or want a tool you can sharpen and repair for years, as with the ARS HP-VS8Z.

Save if

You prune a few times a season and mostly cut soft stems, in which case the Fiskars Bypass Pruning Shears is enough.

Ownership

Maintenance schedule

The upkeep that decides whether a piece still looks good in year five.

TaskIntervalWhy it matters
Wipe off sap and moistureAfter each sessionSap hardens and holds moisture against the steel. Wiping with a cloth keeps blades moving freely and prevents rust.
Oil the blade and pivotMonthly in seasonA thin film of oil protects carbon steel and keeps the pivot smooth. Wipe off excess so it does not collect dirt.
Sharpen the bevelWhen cuts start to tearOn a bypass blade, sharpen only the single outer bevel. A sharp edge reduces hand strain and makes cleaner cuts.
Disinfect between plantsWhen cutting diseased growthPruners can carry disease from one plant to the next. Wipe the blades with an appropriate disinfectant before moving on.
Check the spring and boltEach seasonA loose bolt wobbles the blades and a weak spring tires the hand. Tighten the bolt and replace worn springs where parts are available.

FAQ

Frequently Asked Questions

Should I buy bypass or anvil pruners?

Bypass for almost all garden work, since it cuts live wood cleanly. Anvil pruners crush stems and are better kept for dead, dry wood.

Is it worth paying more for a professional pair?

If you prune often, yes. A pair such as the ARS HP-VS8Z is built to be sharpened and repaired, while cheaper pairs are often discarded when the spring fails.

How long do pruning shears last?

A well-kept pair can last many years, and a neglected one can rust or jam in a season. Cleaning, oiling and sharpening matter more than the brand.

Does a higher hardness number mean a better blade?

Not always. Harder steel such as the Kimura at a listed 60 HRC keeps an edge longer but can chip if twisted, so technique matters as much as the rating.

Can I cut thick branches with hand pruners?

Only up to the stated capacity, and listings differ. For branches over about an inch, use loppers, such as a 28 inch bypass model rated for 1.5 inches, or a pruning saw.

Are pruning shears dangerous to carry?

They are sharp, so lock the blade when you are not cutting and keep them out of reach of children. Wear gloves and cut away from your body.

Bottom line

The short version

Browse more pruning shearson Amazon →
Brianna Cole, Lead Product Editor

About the author

Brianna Cole

Lead Product Editor, SenseiReview

Brianna Cole leads SenseiReview's buying guides, turning published specifications, documentation and owner feedback patterns into clear verdicts across home, tech, fitness, outdoor and DIY products.

More from Brianna →

Keep reading

Related guides